🔧 ESPA ES4 16 4" submersible pump with O4I motor: complete borehole set
🔄 This pump is also available with:
- ✔ Coverco motor
- ✔ Franklin motor
- ✔ ES4 hydraulic section only, to fit to a 4" motor you already have
Each borehole pump consists of a hydraulic section and a motor. Choose the pump, then the motor you prefer.
Ready-to-install set with 4" ESPA ES4 16 submersible hydraulic section and ESPA O4I motor. Designed to pump clean water from boreholes for domestic water supply, irrigation, agriculture and industry. Available in single-phase 230 V and three-phase 400 V versions, with power ratings from 3 to 7.5 HP.
✔ ES4 hydraulic section
- ✔ Housing, intake, discharge and shaft: AISI 304 stainless steel
- ✔ Diffusers and impellers: floating, made of technopolymer
- ✔ Seals: NBR/EPDM
- ✔ Built-in check valve
- ✔ Coupling: NEMA MG1-18.388 standard
⚙️ O4I Motor
- ✔ 4" ESPA O4I motor, 2-pole asynchronous, oil-cooled
- ✔ Housing and shaft: AISI 304 stainless steel
- ✔ IPX8 protection and class F insulation
- ✔ Continuous operation; the single-phase model has built-in thermal protection
- ✔ Cable without plug and external capacitor on the single-phase model
📊 Technical Table by Model
| Model | Motor | Voltage | HP | kW | Hydraulic section length (mm) | Connection |
|---|---|---|---|---|---|---|
| ES4 16/08 | O4I 300M | 1x230V | 3 | 2,2 | 676 | 2" |
| ES4 16/08 | O4I 300 | 3x400V | 3 | 2,2 | 676 | 2" |
| ES4 16/11 | O4I 400 | 3x400V | 4 | 3 | 880 | 2" |
| ES4 16/13 | O4I 550 | 3x400V | 5,5 | 4 | 1013 | 2" |
| ES4 16/15 | O4I 550 | 3x400V | 5,5 | 4 | 1149 | 2" |
| ES4 16/20 | O4I 750 | 3x400V | 7,5 | 5,5 | 1489 | 2" |
💧 Head (m) by Flow Rate (m³/h)
| Model | 0 | 8,4 | 12 | 15,6 | 19,2 | 24 |
|---|---|---|---|---|---|---|
| ES4 16/08 | 51 | 41 | 35 | 29 | 22 | 12 |
| ES4 16/11 | 70 | 57 | 49 | 41 | 31 | 18 |
| ES4 16/13 | 81 | 67 | 58 | 48 | 38 | 22 |
| ES4 16/15 | 97 | 79 | 69 | 58 | 46 | 27 |
| ES4 16/20 | 125 | 102 | 89 | 74 | 60 | 37 |
In the table, each column is a flow rate in m³/h, and the value is the head in meters.
📋 Operating Limits
- ✔ Maximum water temperature: 35 °C (motor limit)
- ✔ Suspended sand: up to 100 g/m³