💧 Zenit CTG Sewage Macerating Pump
Pumps for macerating sewage, Zenit CTG from the Grey range.
🔧 Features
- ✔ Power supply: three-phase 3x400V
- ✔ Power: 3 to 20 HP
- ✔ Connections: 100 mm, 80 mm
- ✔ Models: 6
📊 Technical Table
| Model | Voltage | HP | A | Connections | Head [m] | Flow rate [l/h] | Solids [mm] |
|---|---|---|---|---|---|---|---|
| CTG 300/4/80 A0ET | 3x400V | 3 | 5,2 | 80 mm | 1.9 to 12.9 | 115200 to 14400 | 32 |
| CTG 550/4/80 A0FT | 3x400V | 5,5 | 8,4 | 80 mm | 2.8 to 18.6 | 144000 to 14400 | 30 |
| CTG 750/4/100 A0FT | 3x400V | 7,5 | 11,9 | 100 mm | 4.2 to 19.2 | 172800 to 28800 | 36 |
| CTG 1000/4/100 A0GT | 3x400V | 10 | 15,8 | 100 mm | 7.7 to 22.9 | 172800 to 28800 | 34 |
| CTG 1500/4/100 B0HT | 3x400V | 15 | 20,5 | 100 mm | 4.4 to 27 | 259200 to 28800 | 44 |
| CTG 2000/4/100 B0HT | 3x400V | 20 | 30,8 | 100 mm | 9.2 to 31.1 | 259200 to 28800 | 42 |
🔩 Required accessories
- ✔ Support foot: required for free-standing installation; a coupling base is used for fixed installation: Zenit 9024.114 support foot for CTG 300/4/80, CTG 550/4/80; Zenit 9024.091 support foot for CTG 750/4/100, CTG 1000/4/100, CTG 1500/4/100, CTG 2000/4/100
- ✔ Threaded flange: required, not included with the pump: Zenit KFL/G 80 threaded flange for CTG 300/4/80, CTG 550/4/80; Zenit KFL/G 100 threaded flange for models with DN100 flanged outlet
🔩 Optional accessories
- ✔ Check valve: on the outlet pipe: Zenit VAP 80 ball check valve for CTG 300/4/80, CTG 550/4/80
- ✔ Knife gate valve: to isolate the outlet pipe: Zenit SRP/80 DN80 knife gate valve for CTG 300/4/80, CTG 550/4/80