🔧 ESPA ES4 02 4" Submersible Pump with Franklin Motor: complete borehole assembly
🔄 This pump is also available with:
- ✔ ESPA O4I Motor
- ✔ Coverco Motor
- ✔ ES4 pump end only, for fitting to a 4" motor you already own
Each borehole pump consists of a pump end and a motor. Choose the pump, then the motor you prefer.
Ready-to-install assembly with 4" ESPA ES4 02 submersible pump end and Franklin Electric motor. Designed to pump clean water from boreholes for domestic water supply, irrigation, agriculture, and industry. Available in single-phase 230 V and three-phase 400 V versions, with power ratings from 0.75 to 2 HP.
✔ ES4 hydraulic section
- ✔ Body, intake, discharge and shaft: AISI 304 stainless steel
- ✔ Diffusers and impellers: floating, made of technopolymer
- ✔ Seals: NBR/EPDM
- ✔ Built-in check valve
- ✔ Coupling: NEMA MG1-18.388 standard
⚙️ Franklin Motor
- ✔ Franklin Electric 4" motor, asynchronous, water-filled
- ✔ Construction: NSS motor made of AISI 304 stainless steel
- ✔ Insulation class B; voltage tolerance +6% / -10%
- ✔ Starts: up to 20 per hour, spaced out
- ✔ Installation vertically or horizontally; compatible with a frequency converter above 30 Hz
- ✔ NEMA 4" coupling; for single-phase models, the external capacitor is included in the kit
📊 Technical Table by Model
| Model | Motor | Voltage | HP | kW | Hydraulic length (mm) | Connection |
|---|---|---|---|---|---|---|
| ES4 02/10 | Franklin 4" 0.55 kW | 1x230V | 0,75 | 0,55 | 349 | 1 1/4" |
| ES4 02/10 | Franklin 4" 0.55 kW | 3x400V | 0,75 | 0,55 | 349 | 1 1/4" |
| ES4 02/14 | Franklin 4" 0.75 kW | 1x230V | 1 | 0,75 | 418 | 1 1/4" |
| ES4 02/14 | Franklin 4" 0.75 kW | 3x400V | 1 | 0,75 | 418 | 1 1/4" |
| ES4 02/20 | Franklin 4" 1.1 kW | 1x230V | 1,5 | 1,1 | 523 | 1 1/4" |
| ES4 02/20 | Franklin 4" 1.1 kW | 3x400V | 1,5 | 1,1 | 523 | 1 1/4" |
| ES4 02/28 | Franklin 4" 1.5 kW | 1x230V | 2 | 1,5 | 702 | 1 1/4" |
| ES4 02/28 | Franklin 4" 1.5 kW | 3x400V | 2 | 1,5 | 702 | 1 1/4" |
💧 Head (m) by Flow Rate (m³/h)
| Model | 0 | 1,2 | 1,5 | 1,8 | 2,1 | 2,4 | 2,7 | 3 |
|---|---|---|---|---|---|---|---|---|
| ES4 02/10 | 62 | 58 | 56 | 52 | 47 | 41 | 36 | 29 |
| ES4 02/14 | 88 | 81 | 78 | 73 | 66 | 57 | 50 | 42 |
| ES4 02/20 | 125 | 114 | 105 | 100 | 92 | 79 | 70 | 60 |
| ES4 02/28 | 178 | 154 | 148 | 138 | 125 | 113 | 97 | 84 |
In the table, each column shows a flow rate in m³/h and the value is the head in meters.
📋 Operating Limits
- ✔ Maximum water temperature: 30 °C (motor limit)
- ✔ Maximum depth: 150 m (motor)
- ✔ Suspended sand: up to 100 g/m³