🔧 ESPA ES4 02 4" Submersible Pump with O4I Motor: complete borehole assembly
🔄 This pump is also available with:
- ✔ Coverco Motor
- ✔ Franklin Motor
- ✔ ES4 pump end only, for fitting to a 4" motor you already own
Each borehole pump consists of a pump end and a motor. Choose the pump, then the motor you prefer.
Ready-to-install assembly with 4" ESPA ES4 02 submersible pump end and ESPA O4I motor. Designed to pump clean water from boreholes for domestic water supply, irrigation, agriculture, and industry. Available in single-phase 230 V and three-phase 400 V versions, with power ratings from 0.75 to 2 HP.
✔ ES4 pump end
- ✔ Body, suction, discharge, and shaft: AISI 304 stainless steel
- ✔ Diffusers and impellers: floating, made of technopolymer
- ✔ Seals: NBR/EPDM
- ✔ Built-in check valve
- ✔ Coupling: NEMA MG1-18.388 standard
⚙️ O4I Motor
- ✔ 4" ESPA O4I motor, 2-pole asynchronous, oil-cooled
- ✔ Housing and shaft: AISI 304 stainless steel
- ✔ IPX8 protection and Class F insulation
- ✔ Continuous operation; single-phase models have built-in thermal protection
- ✔ Cable without plug and external capacitor for single-phase models
📊 Technical Specifications by Model
| Model | Motor | Voltage | HP | kW | Pump end length (mm) | Connection |
|---|---|---|---|---|---|---|
| ES4 02/10 | O4I 075M | 1x230V | 0,75 | 0,55 | 349 | 1 1/4" |
| ES4 02/10 | O4I 075 | 3x400V | 0,75 | 0,55 | 349 | 1 1/4" |
| ES4 02/14 | O4I 100M | 1x230V | 1 | 0,75 | 418 | 1 1/4" |
| ES4 02/14 | O4I 100 | 3x400V | 1 | 0,75 | 418 | 1 1/4" |
| ES4 02/20 | O4I 150M | 1x230V | 1,5 | 1,1 | 523 | 1 1/4" |
| ES4 02/20 | O4I 150 | 3x400V | 1,5 | 1,1 | 523 | 1 1/4" |
| ES4 02/28 | O4I 200M | 1x230V | 2 | 1,5 | 702 | 1 1/4" |
| ES4 02/28 | O4I 200 | 3x400V | 2 | 1,5 | 702 | 1 1/4" |
💧 Head (m) by Flow Rate (m³/h)
| Model | 0 | 1,2 | 1,5 | 1,8 | 2,1 | 2,4 | 2,7 | 3 |
|---|---|---|---|---|---|---|---|---|
| ES4 02/10 | 62 | 58 | 56 | 52 | 47 | 41 | 36 | 29 |
| ES4 02/14 | 88 | 81 | 78 | 73 | 66 | 57 | 50 | 42 |
| ES4 02/20 | 125 | 114 | 105 | 100 | 92 | 79 | 70 | 60 |
| ES4 02/28 | 178 | 154 | 148 | 138 | 125 | 113 | 97 | 84 |
In the table, each column shows a flow rate in m³/h and the value is the head in meters.
📋 Operating Limits
- ✔ Maximum water temperature: 35 °C (motor limit)
- ✔ Suspended sand: up to 100 g/m³