🔧 ESPA ES4 04 4" Submersible Pump with O4I Motor: complete borehole set
🔄 This pump is also available with:
- ✔ Coverco Motor
- ✔ Franklin Motor
- ✔ ES4 hydraulic unit only, for fitting to an existing 4" motor
Each borehole pump consists of a hydraulic unit and a motor. Choose the pump, then select your preferred motor.
Ready-to-install set with a 4" ESPA ES4 04 submersible hydraulic unit and ESPA O4I motor. Designed to pump clean water from boreholes for domestic water supply, irrigation, agriculture and industry. Available in single-phase 230 V and three-phase 400 V versions, with outputs from 1 to 5.5 CV.
✔ ES4 hydraulic unit
- ✔ Body, suction, discharge and shaft: AISI 304 stainless steel
- ✔ Diffusers and impellers: floating, made of technopolymer
- ✔ Seals: NBR/EPDM
- ✔ Built-in check valve
- ✔ Coupling: NEMA MG1-18.388 standard
⚙️ O4I Motor
- ✔ ESPA O4I motor, 4", 2-pole asynchronous, oil-cooled
- ✔ Housing and shaft: AISI 304 stainless steel
- ✔ IPX8 protection and Class F insulation
- ✔ Continuous duty; single-phase model has built-in thermal protection
- ✔ Cable without plug and external capacitor on single-phase models
📊 Technical Table by Model
| Model | Motor | Voltage | CV | kW | Hydraulic unit length (mm) | Connection |
|---|---|---|---|---|---|---|
| ES4 04/08 | O4I 100M | 1x230V | 1 | 0,75 | 345 | 1 1/4" |
| ES4 04/08 | O4I 100 | 3x400V | 1 | 0,75 | 345 | 1 1/4" |
| ES4 04/12 | O4I 150M | 1x230V | 1,5 | 1,1 | 433 | 1 1/4" |
| ES4 04/12 | O4I 150 | 3x400V | 1,5 | 1,1 | 433 | 1 1/4" |
| ES4 04/16 | O4I 200M | 1x230V | 2 | 1,5 | 542 | 1 1/4" |
| ES4 04/16 | O4I 200 | 3x400V | 2 | 1,5 | 542 | 1 1/4" |
| ES4 04/24 | O4I 300M | 1x230V | 3 | 2,2 | 777 | 1 1/4" |
| ES4 04/24 | O4I 300 | 3x400V | 3 | 2,2 | 777 | 1 1/4" |
| ES4 04/32 | O4I 400 | 3x400V | 4 | 3 | 965 | 1 1/4" |
| ES4 04/44 | O4I 550 | 3x400V | 5,5 | 4 | 1296 | 1 1/4" |
💧 Head (m) by Flow Rate (m³/h)
| Model | 0 | 2,4 | 3,0 | 4,2 | 5,4 | 6,0 |
|---|---|---|---|---|---|---|
| ES4 04/08 | 51 | 46 | 43 | 35 | 24 | 18 |
| ES4 04/12 | 77 | 71 | 68 | 57 | 41 | 31 |
| ES4 04/16 | 102 | 96 | 92 | 77 | 57 | 46 |
| ES4 04/24 | 151 | 139 | 132 | 111 | 80 | 62 |
| ES4 04/32 | 203 | 185 | 175 | 146 | 105 | 80 |
| ES4 04/44 | 278 | 260 | 247 | 210 | 159 | 127 |
In the table, each column shows a flow rate in m³/h and the value is the head in meters.
📋 Operating Limits
- ✔ Maximum water temperature: 35 °C (motor limit)
- ✔ Suspended sand: up to 100 g/m³