🔧 ESPA ES4 12 4" Submersible Pump with O4I Motor: complete borehole pump set
🔄 This pump is also available with:
- ✔ Coverco motor
- ✔ Franklin motor
- ✔ ES4 hydraulic unit only, for fitting to an existing 4" motor
Each borehole pump consists of a hydraulic unit and a motor. Choose the pump, then the motor you prefer.
Ready-to-install set with a 4" ESPA ES4 12 submersible hydraulic unit and an ESPA O4I motor. Designed to pump clean water from boreholes for domestic water supply, irrigation, agriculture and industry. Available in single-phase 230 V and three-phase 400 V versions, with power ratings from 2 to 7.5 HP.
✔ ES4 hydraulic unit
- ✔ Body, intake, discharge and shaft: AISI 304 stainless steel
- ✔ Diffusers and impellers: floating, made of technopolymer
- ✔ Seals: NBR/EPDM
- ✔ Built-in check valve
- ✔ Coupling: NEMA MG1-18.388 standard
⚙️ O4I motor
- ✔ 4" ESPA O4I motor, 2-pole asynchronous, oil-cooled
- ✔ Housing and shaft: AISI 304 stainless steel
- ✔ IPX8 protection and class F insulation
- ✔ Continuous duty; the single-phase model has built-in thermal protection
- ✔ Cable without plug and external capacitor for single-phase models
📊 Technical Specifications by Model
| Model | Motor | Voltage | HP | kW | Hydraulic unit length (mm) | Connection |
|---|---|---|---|---|---|---|
| ES4 12/07 | O4I 200M | 1x230V | 2 | 1,5 | 534 | 2" |
| ES4 12/07 | O4I 200 | 3x400V | 2 | 1,5 | 534 | 2" |
| ES4 12/10 | O4I 300M | 1x230V | 3 | 2,2 | 690 | 2" |
| ES4 12/10 | O4I 300 | 3x400V | 3 | 2,2 | 690 | 2" |
| ES4 12/14 | O4I 400 | 3x400V | 4 | 3 | 989 | 2" |
| ES4 12/19 | O4I 550 | 3x400V | 5,5 | 4 | 1195 | 2" |
| ES4 12/26 | O4I 750 | 3x400V | 7,5 | 5,5 | 1559 | 2" |
💧 Head (m) by Flow Rate (m³/h)
| Model | 0 | 6,0 | 8,4 | 10,8 | 13,2 | 15,6 |
|---|---|---|---|---|---|---|
| ES4 12/07 | 45 | 37 | 33 | 28 | 22 | 14 |
| ES4 12/10 | 64 | 54 | 48 | 41 | 32 | 20 |
| ES4 12/14 | 89 | 76 | 67 | 56 | 43 | 28 |
| ES4 12/19 | 120 | 102 | 91 | 76 | 58 | 37 |
| ES4 12/26 | 163 | 136 | 120 | 100 | 75 | 48 |
In the table, each column shows a flow rate in m³/h and the value is the head in meters.
📋 Operating Limits
- ✔ Maximum water temperature: 35 °C (motor limit)
- ✔ Suspended sand: up to 100 g/m³