💧 ESPA Drainex 300 Wastewater Pump: cast iron, single-phase or three-phase
The ESPA Drainex 300 is a 1.5 HP submersible wastewater pump for suspended solids up to 45 mm: drainage of sewage, septic tanks and underground drainage water. Available in single-phase 230 V, with or without an automatic float switch, and three-phase 400 V. Supplied with feet and a 2½" (DN65) outlet elbow.
🔩 Materials
- ✔ Body, base and impeller: GG20 cast iron
- ✔ Motor shaft: AISI 420 stainless steel
- ✔ Mechanical seal: double silicon carbide
- ✔ Float: polypropylene (230 V versions with float switch)
🧰 Equipment
- ✔ Cable: 10 m neoprene
- ✔ Connection: 2½" outlet (DN65), with feet and outlet elbow
⚙️ Motor
- ✔ Single-phase: 230 V 50 Hz, with permanent capacitor
- ✔ Three-phase: 400 V 50 Hz, direct start
- ✔ Protection: IP68, class F insulation
- ✔ Continuous operation: with the pump fully submerged
📋 Operating Limits
- ✔ Temperature: maximum liquid temperature 40 °C
- ✔ Solids passage: up to 45 mm
- ✔ Starts: maximum 30 per hour
📊 Technical Table by Model
| Model | HP | P1 kW | P2 kW | At 1x230V | At 3x400V |
|---|---|---|---|---|---|
| Drainex 300 | 1,5 | 1,2 | 1,1 | 5,5 | 1,2 |
| Drainex 301 | 1,5 | 1,5 | 1,1 | 6,8 | 1,5 |
| Drainex 302 | 1,5 | 1,8 | 1,1 | 7,8 | 1,8 |
💧 Head (m) by Flow Rate (m³/h)
| Model | 3 | 6 | 12 | 24 | 30 | 39 |
|---|---|---|---|---|---|---|
| Drainex 300 | 7,1 | 5,4 | 2,9 | 1,8 | - | - |
| Drainex 301 | 9,2 | 8,5 | 7 | 4,1 | 2,8 | - |
| Drainex 302 | 11 | 10,5 | 9 | 5,8 | 4,2 | 1,8 |
In the table, each column shows a flow rate in m³/h, and the value is the head in meters.
🔤 How to Read the Model Numbers
- ✔ 300, 301 and 302: have the same 1.5 HP motor; the current and curve differ: the 302 provides the greatest head and the 300 the least (see table)
- ✔ 230V with float: single-phase models with automatic float switch
- ✔ 230V without float and 400V: connect via a separate control panel or controller