💧 LEO 50WQ Submersible Sewage Pump with Grinder
Cast-iron submersible sewage pump with cutting system (grinder), for wastewater containing fibers and solids, in single-phase version with float switch or three-phase version.
🏠 Applications
- ✔ Drainage of wastewater in factories, construction sites and commercial spaces
- ✔ Drainage systems at wastewater treatment plants
- ✔ Pumping stations in residential areas
- ✔ Municipal works
- ✔ Biogas pits and agricultural irrigation
🔩 Features
- ✔ Cutting system: Cutting blade (QG) and fixed cutting head in 9Cr18 stainless steel
- ✔ Body: Top cover, motor housing, pump body, base and impeller made of HT200 cast iron, with electrophoretic coating
- ✔ Handle: PP-GF10
- ✔ Shaft: AISI 304 stainless steel welded to 45# steel
- ✔ Mechanical seal: Double
- ✔ Bearings: 0.75 kW: 6202 and 6203; 1.1 kW: 6203 and 6204
- ✔ Motor: Copper winding, continuous duty S1
- ✔ Insulation: Class F
- ✔ Protection: IP68
- ✔ Cable: 10 m
- ✔ Power supply: 1x230V (WQD, with float) or 3x400V (WQ)
- ✔ Outlet: 2" (50 mm); TM with threaded body, T without M with flanged body
- ✔ Installation: With hose, pipe or quick coupling
- ✔ Turbine: Open multi-channel cast iron
- ✔ Seal: 2 separate oil chamber seals, 1 silicon carbide and 1 graphite
- ✔ Thermal protection: Built into 1x230V models
📋 Operating Limits
- ✔ Liquid temperature: 0 to 40 °C
- ✔ Liquid pH: 4 to 10
- ✔ Liquid density: up to 1.2 x 10³ kg/m³
- ✔ Maximum immersion depth: 5 m
📊 Technical Table by Model
| Model | V | HP | A | Outlet | Flow rate l/h | Head m |
|---|---|---|---|---|---|---|
| 50WQD10-7-0.75TMA/QG with float | 1x230V | 1 | 5,2 | 2" | 14000 to 1000 | 2 to 13 |
| 50WQ10-7-0.75TM/QG | 3x400V | 1 | 1,8 | 2" | 14000 to 1000 | 2 to 13 |
| 50WQD10-10-1.1TMA/QG with float | 1x230V | 1,5 | 7,2 | 2" | 15000 to 1000 | 3 to 16 |
| 50WQ10-10-1.1TM/QG | 3x400V | 1,5 | 2,4 | 2" | 15000 to 1000 | 3 to 16 |
| 50WQD15-9-1.1TMA/QG with float | 1x230V | 1,5 | 6,5 | 2" | 27000 to 3000 | 5 to 13 |
| 50WQ15-9-1.1T/QG | 3x400V | 1,5 | 2,1 | 2" | 27000 to 3000 | 5 to 13 |
💧 Head (m) by Flow Rate (l/min)
| Model | 17 | 50 | 100 | 110 | 130 | 180 | 200 | 230 | 265 | 290 | 380 | 475 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50WQD10-7-0.75TMA/QG with float | 13 | 12,5 | 11 | - | 8,5 | 6 | - | 1,8 | - | - | - | - |
| 50WQ10-7-0.75TM/QG | 13 | 12,5 | 11 | - | 8,5 | 6 | - | 1,8 | - | - | - | - |
| 50WQD10-10-1.1TMA/QG with float | 16 | 15,5 | 13 | - | 11,5 | 8 | - | 4,5 | 1,8 | - | - | - |
| 50WQ10-10-1.1TM/QG | 16 | 15,5 | 13 | - | 11,5 | 8 | - | 4,5 | 1,8 | - | - | - |
| 50WQD15-9-1.1TMA/QG with float | - | 13 | - | 12 | - | - | 10 | - | - | 8 | 6,8 | 4,5 |
| 50WQ15-9-1.1T/QG | - | 13 | - | 12 | - | - | 10 | - | - | 8 | 6,8 | 4,5 |
In the table, each column represents a flow rate in liters per minute, and the value is the head in meters.