Go to content
Skip to product information
Description

💧 CPE2

ESPA CPE2 automatic fixed-speed pressure unit with two Multi pumps for water supply.

💧 Applications

  • ✔ Use: Automatic pumping of clean water for domestic, industrial, agricultural, and garden use
  • ✔ Operating speed: Fixed
  • ✔ Maximum water temperature: 40 °C

🔧 Operation

Automatic start and stop based on water consumption. The unit operates at a fixed speed.

🧰 Equipment included

  • ✔ Control: Controldrive
  • ✔ Manifold: Discharge
  • ✔ Panel: Control and operation
  • ✔ Valves and connections: Included, with check valve
  • ✔ Transducer: Pressure
  • ✔ Base: Metal

🔧 Functions and protections

  • ✔ Transducer: Fault detection
  • ✔ Overcurrent and short circuit: With automatic reset

🔩 Materials

  • ✔ Multi pump: casing and impellers: Stainless steel AISI 304
  • ✔ Pump shaft: Stainless steel AISI 420
  • ✔ Diffusers: Technopolymer
  • ✔ Suction and discharge: Cast iron with cataphoresis treatment
  • ✔ Seal: Mechanical
  • ✔ Motor casing: Aluminum
  • ✔ Seals: NBR/EPDM
  • ✔ Manifolds: Stainless steel AISI 304
  • ✔ Valves and connections: Brass

⚙️ Motor

  • ✔ Type: 2-pole asynchronous, continuous duty
  • ✔ Protection: IPX5
  • ✔ Insulation: Class F

🔧 Tank

The tank (pressure tank) is not included. The recommended capacity for each model is shown in the specifications table. Accessory listed in the catalog for the CPE2: suction kit (2" manifold for Multi 25, code 199701; 2" manifold for Multi 35, code 199702; 3" manifold for Multi 55, code 199703).

📋 Technical specifications and dimensions: CPE2

Model N.º of pumps kW Pump Ø Discharge manifold Ø Dimensions (mm) kg Recommended tank (l) Versions
Suction Discharge Length Width Height 1x230V 3x400V
CPE2 Multi 25 4 2 0,75 1 1/4" 1 1/4" 2" 640 360 850 50 150 yes yes
CPE2 Multi 25 5 2 0,9 1 1/4" 1 1/4" 2" 640 360 850 50 150 yes yes
CPE2 Multi 35 4 2 1,1 1 1/2" 1 1/4" 2" 640 395 855 60 200 yes yes
CPE2 Multi 35 5 2 1,5 1 1/2" 1 1/4" 2" 640 395 865 65 200 yes yes
CPE2 Multi 35 6 2 2,2 1 1/2" 1 1/4" 2" 640 395 905 66 300 - yes
CPE2 Multi 35 8 2 3 1 1/2" 1 1/4" 2" 640 423 955 80 300 - yes
CPE2 Multi 55 4 2 2,2 1 1/2" 1 1/4" 3" 640 423 960 73 500 - yes
CPE2 Multi 55 6 2 3 1 1/2" 1 1/4" 3" 640 430 1040 90 500 - yes
CPE2 Multi 55 7 2 4 1 1/2" 1 1/4" 3" 640 430 1085 99 700 - yes

The tank is not included. The catalog does not publish curves for the unit itself: performance is that of the Multi pumps specified in the model.

Technical data according to the ESPA 2026 catalog. The manufacturer may change the product specifications without prior notice.

ESPA CPE2 Pressure Booster Set

177290

Selling price €1,709.00
Regular price €2,688.00You saved 36% OFF
  • CPE2 M Multi 25 4 - 0,75 kW, 1x230V
  • CPE2 Multi 25 4 - 0,75 kW, 3x400V
  • CPE2 M Multi 25 5 - 0,9 kW, 1x230V
  • CPE2 Multi 25 5 - 0,9 kW, 3x400V
  • CPE2 M Multi 35 4 - 1,1 kW, 1x230V
  • CPE2 Multi 35 4 - 1,1 kW, 3x400V
  • CPE2 M Multi 35 5 - 1,5 kW, 1x230V
  • CPE2 Multi 35 5 - 1,5 kW, 3x400V
  • CPE2 Multi 35 6 - 2,2 kW, 3x400V
  • CPE2 Multi 35 8 - 3 kW, 3x400V
  • CPE2 Multi 55 4 - 2,2 kW, 3x400V
  • CPE2 Multi 55 6 - 3 kW, 3x400V
  • CPE2 Multi 55 7 - 4 kW, 3x400V

💧 CPE2

ESPA CPE2 automatic fixed-speed pressure unit with two Multi pumps for water supply.

💧 Applications

  • ✔ Use: Automatic pumping of clean water for domestic, industrial, agricultural, and garden use
  • ✔ Operating speed: Fixed
  • ✔ Maximum water temperature: 40 °C

🔧 Operation

Automatic start and stop based on water consumption. The unit operates at a fixed speed.

🧰 Equipment included

  • ✔ Control: Controldrive
  • ✔ Manifold: Discharge
  • ✔ Panel: Control and operation
  • ✔ Valves and connections: Included, with check valve
  • ✔ Transducer: Pressure
  • ✔ Base: Metal

🔧 Functions and protections

  • ✔ Transducer: Fault detection
  • ✔ Overcurrent and short circuit: With automatic reset

🔩 Materials

  • ✔ Multi pump: casing and impellers: Stainless steel AISI 304
  • ✔ Pump shaft: Stainless steel AISI 420
  • ✔ Diffusers: Technopolymer
  • ✔ Suction and discharge: Cast iron with cataphoresis treatment
  • ✔ Seal: Mechanical
  • ✔ Motor casing: Aluminum
  • ✔ Seals: NBR/EPDM
  • ✔ Manifolds: Stainless steel AISI 304
  • ✔ Valves and connections: Brass

⚙️ Motor

  • ✔ Type: 2-pole asynchronous, continuous duty
  • ✔ Protection: IPX5
  • ✔ Insulation: Class F

🔧 Tank

The tank (pressure tank) is not included. The recommended capacity for each model is shown in the specifications table. Accessory listed in the catalog for the CPE2: suction kit (2" manifold for Multi 25, code 199701; 2" manifold for Multi 35, code 199702; 3" manifold for Multi 55, code 199703).

📋 Technical specifications and dimensions: CPE2

Model N.º of pumps kW Pump Ø Discharge manifold Ø Dimensions (mm) kg Recommended tank (l) Versions
Suction Discharge Length Width Height 1x230V 3x400V
CPE2 Multi 25 4 2 0,75 1 1/4" 1 1/4" 2" 640 360 850 50 150 yes yes
CPE2 Multi 25 5 2 0,9 1 1/4" 1 1/4" 2" 640 360 850 50 150 yes yes
CPE2 Multi 35 4 2 1,1 1 1/2" 1 1/4" 2" 640 395 855 60 200 yes yes
CPE2 Multi 35 5 2 1,5 1 1/2" 1 1/4" 2" 640 395 865 65 200 yes yes
CPE2 Multi 35 6 2 2,2 1 1/2" 1 1/4" 2" 640 395 905 66 300 - yes
CPE2 Multi 35 8 2 3 1 1/2" 1 1/4" 2" 640 423 955 80 300 - yes
CPE2 Multi 55 4 2 2,2 1 1/2" 1 1/4" 3" 640 423 960 73 500 - yes
CPE2 Multi 55 6 2 3 1 1/2" 1 1/4" 3" 640 430 1040 90 500 - yes
CPE2 Multi 55 7 2 4 1 1/2" 1 1/4" 3" 640 430 1085 99 700 - yes

The tank is not included. The catalog does not publish curves for the unit itself: performance is that of the Multi pumps specified in the model.

Technical data according to the ESPA 2026 catalog. The manufacturer may change the product specifications without prior notice.

Grupo de Pressão ESPA CPE2
ESPA CPE2 Pressure Booster Set
Drawer Title

This website uses cookies to ensure that you get the best experience on our website.

Similar Products