🔧 ESPA ES4 08 4" Submersible Pump with O4I Motor: complete borehole set
🔄 This pump is also available with:
- ✔ Coverco Motor
- ✔ Franklin Motor
- ✔ ES4 hydraulic end only, for mounting on an existing 4" motor
Each borehole pump consists of a hydraulic end and a motor. Choose the pump, then the motor you prefer.
Ready-to-install set with a 4" ESPA ES4 08 submersible hydraulic end and ESPA O4I motor. Designed to pump clean water from boreholes for domestic water supply, irrigation, agriculture and industry. Available in 230 V single-phase and 400 V three-phase versions, with power ratings from 1.5 to 7.5 HP.
✔ ES4 hydraulic end
- ✔ Housing, intake, outlet and shaft: AISI 304 stainless steel
- ✔ Diffusers and impellers: floating, made of technopolymer
- ✔ Seals: NBR/EPDM
- ✔ Built-in check valve
- ✔ Coupling: NEMA MG1-18.388 standard
⚙️ O4I Motor
- ✔ 4" ESPA O4I motor, 2-pole asynchronous, oil-cooled
- ✔ Housing and shaft: AISI 304 stainless steel
- ✔ IPX8 protection and class F insulation
- ✔ Continuous duty; single-phase model has built-in thermal protection
- ✔ Cable without plug and external capacitor for single-phase models
📊 Technical Specifications by Model
| Model | Motor | Voltage | HP | kW | Hydraulic end length (mm) | Connection |
|---|---|---|---|---|---|---|
| ES4 08/06 | O4I 150M | 1x230V | 1,5 | 1,1 | 356 | 2" |
| ES4 08/06 | O4I 150 | 3x400V | 1,5 | 1,1 | 356 | 2" |
| ES4 08/08 | O4I 200M | 1x230V | 2 | 1,5 | 418 | 2" |
| ES4 08/08 | O4I 200 | 3x400V | 2 | 1,5 | 418 | 2" |
| ES4 08/13 | O4I 300M | 1x230V | 3 | 2,2 | 573 | 2" |
| ES4 08/13 | O4I 300 | 3x400V | 3 | 2,2 | 573 | 2" |
| ES4 08/17 | O4I 400 | 3x400V | 4 | 3 | 697 | 2" |
| ES4 08/23 | O4I 550 | 3x400V | 5,5 | 4 | 921 | 2" |
| ES4 08/32 | O4I 750 | 3x400V | 7,5 | 5,5 | 1238 | 2" |
💧 Head (m) by Flow Rate (m³/h)
| Model | 0 | 4,8 | 6,0 | 8,4 | 10,8 | 12 |
|---|---|---|---|---|---|---|
| ES4 08/06 | 39 | 36 | 34 | 29 | 22 | 17 |
| ES4 08/08 | 52 | 48 | 46 | 39 | 29 | 24 |
| ES4 08/13 | 82 | 75 | 71 | 59 | 40 | 30 |
| ES4 08/17 | 108 | 98 | 94 | 79 | 58 | 46 |
| ES4 08/23 | 148 | 134 | 127 | 108 | 79 | 60 |
| ES4 08/32 | 202 | 182 | 172 | 143 | 105 | 80 |
In the table, each column is a flow rate in m³/h and the value is the head in metres.
📋 Operating Limits
- ✔ Maximum water temperature: 35 °C (motor limit)
- ✔ Suspended sand: up to 100 g/m³