💧 Pumps ESPA DRAINCOR Wastewater Grinder Pumps up to 16 m3/h
Submersible grinder pumps for pumping wastewater, septic tanks, seepage water, rainwater, and water with fibrous materials in general.
💧 Applications
For domestic, residential, industrial or agricultural use. Its design uses highly abrasion-resistant materials, giving it a compact and robust appearance. It comes equipped with a DN40 discharge flange and a 90º elbow for 11/2"
They feature a mechanical seal system made of silicon carbide/ceramic to prevent water from entering the electric motor. The single-phase model may be equipped with a built-in level switch. All parts in contact with water have an anti-corrosion coating. They can operate partially submerged, although for optimal operation, fully submerging them is recommended.
🔧 Operation
- ✔ Fluid: Drainage water from sewage and wastewater
- ✔ Maximum liquid temperature: 35 ºC
- ✔ Maximum number of starts per hour: 30
🔩 Construction Features
- ✔ Pump Body: Cast iron GG20
- ✔ Pump Base: Cast iron GG20
- ✔ Impeller: Cast iron GG20
- ✔ Motor Shaft: Stainless steel AISI 420
- ✔ Float: Polypropylene (where applicable, 230V with float switch)
- ✔ Mechanical Seal: Double silicon carbide seal
- ✔ Power Cable: 10 m neoprene cable
⚙️ Electric Motor
- ✔ Motors: submersible with IP68 protection rating and Class F insulation
- ✔ Single-phase 230 V: 50 Hz with permanent capacitor. For continuous operation, the electric pump must operate fully submerged
- ✔ Three-phase 400 V: 50 Hz direct start
🔧 Connections
Ø Outlet 11/2" DN40
🔧 Note
Pumps supplied with feet and outlet elbow 11/2"
Connections
Ø Outlet 11/2 “
🔧 DRAINCOR
| Model | I [A] | P1 | P2 | Q | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 ~ 230V | 3 ~ 230V | 3 ~ 400V | [kW] | [kW] | [ HP ] | l/min 0 | 25 | 50 | 100 | 150 | 200 | 250 | |
| m³/h 0 | 1.5 | 3.0 | 6.0 | 9.0 | 12 | 15 | |||||||
| H [m] | |||||||||||||
| DRAINCOR | 6.4 | - | 2.6 | 1.4 | 0.9 | 1.20 | - | 17 | 15 | 13 | 10 | 7 | 5 |